Command Line Interface Guide

Multicast VLAN Registration Commands 611
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table lists the completion messages.
Example
console #show mvr
MVR Running.............................. TRUE
MVR multicast VLAN....................... 1200
MVR Max Multicast Groups................. 256
Parameter Description
MVR Running MVR running state. It can be enabled or
disabled.
MVR Multicast VLAN Current MVR multicast VLAN. It can be in
the range from 1 to 4094.
MVR Max Multicast Groups The maximum number of multicast groups
that is supported by MVR.
MVR Current Multicast groups The current number of MVR groups
allocated.
MVR Query Response Time The current MVR query response time.
MVR Mode The current MVR mode. It can be
compatible or dynamic.
Message Type Message Description
Successful Completion Message None
Error Completion Message MVR disabled
2CSPC4.X8100-SWUM100.book Page 611 Wednesday, August 29, 2012 6:23 PM