Command Line Interface Guide

612 Multicast VLAN Registration Commands
MVR Current multicast groups............. 1
MVR Global query response time........... 10 (tenths
of sec)
MVR Mode................................. compatible
show mvr members
Use the show mvr members command in Privileged EXEC mode to display
the MVR membership groups allocated.
Syntax
show mvr members [ A.B.C.D ]
Parameter Description
The parameter is a valid multicast address in IPv4 dotted notation. The
following table explains the output parameters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table lists the completion messages.
Parameter Description
MVR Group IP MVR group multicast IP address.
Status The status of the specific MVR group. It can
be active or inactive.
Members The list of ports which participates in the
specific MVR group.
2CSPC4.X8100-SWUM100.book Page 612 Wednesday, August 29, 2012 6:23 PM