Command Line Interface Guide

Port Channel Commands 631
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax Description
show interfaces port-channel [ port-channel-number ]
Parameter Description
The command displays the following information.
Parameter Description
min-links The minimum number of links that must be active before the
link is declared up. Range 1-8. The default is 1.
Parameter Description
[
index ] Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel
number, 1 to 48).
Local Prf An additional field added to support the display of the local
preference.
2CSPC4.X8100-SWUM100.book Page 631 Wednesday, August 29, 2012 6:23 PM