Command Line Interface Guide

632 Port Channel Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example #1
console#show interfaces port-channel
ChannelPorts ChTypeHash Algorithm Typemin-Links
------------------------- --------------------------
---------
Po1Inactive: Gi1/0/3Dynamic31
Po2No Configured PortsStatic31
Hash Algorithm Type
1 - Source MAC, VLAN, Ethertype, source module and
port ID
2 - Destination MAC, VLAN, Ethertype, source module
and port ID
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, Ethertype, source
MODID/port
6 - Source/Destination IP and source/destination
TCP/UDP port
7 - Enhanced hashing mode
2CSPC4.X8100-SWUM100.book Page 632 Wednesday, August 29, 2012 6:23 PM