Command Line Interface Guide

Port Channel Commands 633
Example #2
console#show interfaces port-channel 1
Channel Ports Ch-Type Hash Type Min-links
Local Prf
------- ----------------------------- -------- ---------- -------
-- ---------
Po1 Inactive: Gi1/0/1, Gi1/0/2, Dynamic 3 1
Enabled
Gi1/0/3, Gi1/0/4
show lacp
Use this command in Privileged EXEC mode to display LACP information
for Ethernet ports.
Syntax
show lacp {gigabitethernet unit/slot/port| port-channel port-channel-number
| tengigabitethernet unit/slot/port
| fortygigabitethernet unit/slot/port
[{parameters | statistics}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
2CSPC4.X8100-SWUM100.book Page 633 Wednesday, August 29, 2012 6:23 PM