Command Line Interface Guide

680 QoS Commands
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named "DELL."
console(config)#policy-map DELL in
console(config-policy-classmap)#
random-detect queue-parms
Use the random-detect queue-parms command to configure the green, yellow
and red TCP and non-TCP packet minimum and maximum thresholds and
corresponding drop probabilities on an interface or all interfaces.
Syntax
random-detect queue-parms queue-id [queue-id] ... min-thresh minthresh-
green minthresh-yellow minthresh-red minthresh-nontcp
max-thresh max-
thresh-green max-thresh-yellow max-thresh-red maxthresh-nontcp
no random-detect queue-parms queue-id [queue-id] ...
Parameter Description
Parameter Description
queue-id The class of service queue. Range 0 to 6.
min-thresh The minimum threshold at which to begin dropping, based on
the configured maximum drop probability for each color and
for non-TCP packets. Range 0 to 100.
2CSPC4.X8100-SWUM100.book Page 680 Wednesday, August 29, 2012 6:23 PM