Command Line Interface Guide

684 QoS Commands
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to redirect incoming packets to port 1/0/1.
console(
config-policy-classmap)#redirect 1/0/1
service-policy
Use the service-policy command in either Global Configuration mode (for all
system interfaces) or Interface Configuration mode (for a specific interface)
to attach a policy to an interface. To return to the system default, use the no
form of this command.
Syntax
service-policy {in|out} policymapname
no service-policy {in|out} policymapname
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode (for all system interfaces)
Parameter Description
policymapname Specifies the DiffServ policy name as a unique case-sensitive
alphanumeric string. (Range: 1–31 alphanumeric characters.)
in Apply the policy on ingress.
out Apply the policy on egress.
2CSPC4.X8100-SWUM100.book Page 684 Wednesday, August 29, 2012 6:23 PM