Command Line Interface Guide

692 QoS Commands
58 3
59 3
60 3
61 3
62 3
63 3
console#
show classofservice trust
Use the show classofservice trust command in Privileged EXEC mode to
display the current trust mode setting for a specific interface.
Syntax
show classofservice trust [{gigabitethernet unit/slot/port| port-channel port-
channel-number
| tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
If the interface is specified, the port trust mode of the interface is displayed.
If omitted, the port trust mode for global configuration is shown.
Example
The following example displays the current trust mode settings for the
specified port.
console#show classofservice trust 1/0/2
Class of Service Trust Mode: Dot1P
2CSPC4.X8100-SWUM100.book Page 692 Wednesday, August 29, 2012 6:23 PM