Command Line Interface Guide

QoS Commands 693
show diffserv
Use the show diffserv command in Privileged EXEC mode to display the
DiffServ general information, which includes the current administrative
mode setting as well as the current and maximum number of DiffServ
components.
Syntax
show diffserv
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show diffserv
DiffServ Admin mode.......................... Enable
Class Table Size Current/Max................. 5 / 25
Class Rule Table Size Current/Max............ 6 / 150
Policy Table Size Current/Max................ 2 / 64
Policy Instance Table Size Current/Max....... 2 / 640
Policy Attribute Table Size Current/Max...... 2 / 1920
Service Table Size Current/Max............... 26 / 214
2CSPC4.X8100-SWUM100.book Page 693 Wednesday, August 29, 2012 6:23 PM