Command Line Interface Guide

694 QoS Commands
show diffserv service interface
Use this command in Privileged EXEC mode to display policy service
information for the specified interface.
Syntax
show diffserv service interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port
| fortygigabitethernet unit/slot/port}
{in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface
gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... 1/0/1
Direction..................................... In
Parameter Description
in Show ingress policies.
out Show egress policies.
2CSPC4.X8100-SWUM100.book Page 694 Wednesday, August 29, 2012 6:23 PM