Command Line Interface Guide

QoS Commands 695
No policy is attached to this interface in this
direction.
show diffserv service interface port-channel
Syntax Description
show diffserv service interface port-channel channel-group {in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
Not applicable
Example
console#show diffserv service interface port-channel
1 in
DiffServ Admin Mode........................... Enable
Interface..................................... po1
Direction..................................... In
Parameter Description
channel-group A valid port-channel in the system. (Range: 1–18)
in Show ingress policies.
out Show egress policies.
2CSPC4.X8100-SWUM100.book Page 695 Wednesday, August 29, 2012 6:23 PM