Command Line Interface Guide

700 QoS Commands
Syntax
show interfaces random-detect interface-id
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Use the show interfaces cos-queue command to show the global or per
interface scheduler type and queue management types.
show policy-map
Use the show policy-map command in Privileged EXEC mode to display all
configuration information for the specified policy.
Syntax
show policy-map [ policyname ]
• policyname — Specifies the name of a valid existing DiffServ policy.
(Range: 1-31)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
Parameter Description
interface-id Specify an interface type. Valid interfaces include physical ports
and port channels.
2CSPC4.X8100-SWUM100.book Page 700 Wednesday, August 29, 2012 6:23 PM