Command Line Interface Guide

Spanning Tree Commands 743
Syntax
name string
• string — Case sensitive MST configuration name. (Range: 1-32
characters)
Default Configuration
Bridge address.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the configuration name to “region1”.
console(config)#spanning-tree mst configuration
console(config-mst)#name region1
revision (mst)
Use the revision command in MST mode to identify the configuration
revision number. To return to the default setting, use the no form of this
command.
Syntax
revision version
no revision
• version — Configuration revision number. (Range: 0-65535)
Default Configuration
Revision number is 0.
2CSPC4.X8100-SWUM100.book Page 743 Wednesday, August 29, 2012 6:23 PM