Command Line Interface Guide
744 Spanning Tree Commands
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the configuration revision to 1.
console(config)#spanning-tree mst configuration
console(config-mst)#revision 1
show spanning-tree
Use the show spanning-tree command in Privileged EXEC mode to display
the spanning-tree configuration.
Syntax
show spanning-tree [{gigabitethernet unit/slot/port |
port-channel
port-
channel-number
| tengigabitethernet unit/slot/port
|
fortygigabitethernet
unit/slot/port}]
[instance
instance-id
]
show spanning-tree [detail] [active | blockedports] | [instance
instance-id
]
show spanning-tree mst-configuration
Parameter Description
Parameter Description
detail Displays detailed information.
active Displays active ports only.
blockedports Displays blocked ports only.
mst-configuration Displays the MST configuration identifier.
instance -id ID of the spanning -tree instance.
2CSPC4.X8100-SWUM100.book Page 744 Wednesday, August 29, 2012 6:23 PM