Command Line Interface Guide

752 Spanning Tree Commands
Example
console#show spanning-tree summary
Spanning Tree Adminmode........... Enabled
Spanning Tree Version............. IEEE 802.1w
BPDU Guard Mode................... Disabled
BPDU Flood Mode................... Disabled
BPDU Filter Mode.................. Disabled
Configuration Name................ 00-1E-C9-AA-AC-84
Configuration Revision Level...... 0
Configuration Digest Key..........
0xac36177f50283cd4b83821d8ab26de62
Configuration Format Selector..... 0
spanning-tree
Use the spanning-tree command in Global Configuration mode to enable
spanning-tree functionality. To disable spanning-tree functionality, use the no
form of this command.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
MST Instances List of all multiple spanning tree instances configured
on the switch.
2CSPC4.X8100-SWUM100.book Page 752 Wednesday, August 29, 2012 6:23 PM