Command Line Interface Guide

TACACS+ Commands 777
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to
configure a TACACS+ server. This command enters into the TACACS+
configuration mode. To delete the specified hostname or IP address, use the
no form of this command.
Syntax
tacacs-server host { ip-address | hostname }
no tacacs-server host {
ip-address | hostname }
• ip-address — The IP address of the TACACS+ server.
•
hostname — The hostname of the TACACS+ server. (Range: 1-255
characters).
Default Configuration
No TACACS+ host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple tacacs-server host commands can be used.
TACACS servers are keyed by the host name, therefore it is advisable to use
unique host names.
Example
The following example specifies a TACACS+ host.
console(config)#tacacs-server host 172.16.1.1
console(tacacs)#
2CSPC4.X8100-SWUM100.book Page 777 Wednesday, August 29, 2012 6:23 PM