Command Line Interface Guide

808 VLAN Commands
Command Mode
Privileged EXEC mode, Interface Config mode and all Config sub-modes
User Guidelines
Do not configure private VLANs on ports configured with any of these
features:
• Link Aggregation Control Protocol (LACP)
• Multicast VLAN Registration (MVR)
• Voice VLAN
It is recommended that the private VLAN host ports be configured as
spanning-tree portfast.
Examples
The following example displays switchport configuration individually for
gi1/0/1.
console#show interface switchport gigabitethernet
1/0/1
Port 1/0/1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled
Port 1/0/1 is member in:
VLAN Name Egress rule Type
---- --------- ----------- -----
1 default untagged Default
2CSPC4.X8100-SWUM100.book Page 808 Wednesday, August 29, 2012 6:23 PM