Command Line Interface Guide

812 VLAN Commands

•

groupid

— The protocol-based VLAN group ID, which is automatically

generated when you create a protocol-based VLAN group with the

vlan

protocol group

command.

•

all

— Enter

all

to show all interfaces.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode, Config mode and all Config sub-modes

User Guidelines

This command has no user guidelines.

Example

The following example displays the Protocol-Based VLAN information for

either the entire system.

console#show port protocol all

Group

Name ID Protocol(s VLAN Interface(s)

--------------- ----- ---------- ---- -----------

test 1 IP 1 1/0/1

show vlan

Use the show vlan command in Privileged EXEC mode to display detailed

information, including interface information and dynamic VLAN type, for a

specific VLAN. The ID is a valid VLAN identification number.

Syntax

show vlan [id

vlanid |name vlan-name]

2CSPC4.X8100-SWUM100.book Page 812 Wednesday, August 29, 2012 6:23 PM