Command Line Interface Guide

VLAN Commands 813
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information for VLAN id 1, 2 and 3.
console#show vlan id 1
VLAN Name Ports Type
----- --------------- ------------- -----
---------
1 default Po1-48, Default
Gi1/0/1-10
console#show vlan id 2
VLAN Name Ports Type
----- --------------- ------------- -----
---------
2 VLAN0002 Gi1/0/11-20 Dynamic
(DOT1X)
Parameter Description
vlanid VLAN identifier
vlan-name A valid VLAN name (Range 1-32 characters)
2CSPC4.X8100-SWUM100.book Page 813 Wednesday, August 29, 2012 6:23 PM