Command Line Interface Guide

VLAN Commands 827
no vlan association subnet ip-address subnet-mask
• ip-address — Source IP address. (Range: Any valid IP address)
•
subnet-mask — Subnet mask. (Range: Any valid subnet mask)
Default Configuration
No assigned ip-subnet.
Command Mode
VLAN Config mode
User Guidelines
This command has no user guidelines.
Example
The following example associates the 192.168.0.xxx IP address with VLAN ID
1.
console(config)#interface vlan 1
console(config-vlan-1)#vlan association subnet
192.168.0.0 255.255.255.0
vlan database
Use the vlan database command in Global Configuration mode to enter the
VLAN database configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.X8100-SWUM100.book Page 827 Wednesday, August 29, 2012 6:23 PM