Command Line Interface Guide

828 VLAN Commands
User Guidelines
This command has no user guidelines.
Example
The following example enters the VLAN database mode.
console(config)#vlan database
console(config-vlan)#
vlan makestatic
This command changes a dynamically created VLAN (one that is created by
GVRP registration) to a static VLAN (one that is permanently configured and
defined). The ID is a valid VLAN identification number. VLAN range is 2-
4093.
Syntax
vlan makestatic vlan-id
• vlan-id — Valid vlan ID. Range is 2–4093.
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database Mode
User Guidelines
The dynamic VLAN (created via GRVP) should exist prior to executing this
command. See the Type column in output from the
show vlan command to
determine that the VLAN is dynamic.
Example
The following changes vlan 3 to a static VLAN.
console(config-vlan)#vlan makestatic 3
2CSPC4.X8100-SWUM100.book Page 828 Wednesday, August 29, 2012 6:23 PM