Command Line Interface Guide

802.1x Commands 863
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
If you do not use the optional parameters, the command displays the global
dot1x mode and the VLAN Assignment mode.
Example
console#show dot1x
Administrative Mode..............Enabled
VLAN Assignment Mode.............Disabled
Monitor Mode.....................Disabled
Parameter Description
interface-id Any valid interface. See
Interface Naming Conventions for
interface representation.
Field Description
Administrative
Mode
Indicates whether authentication control on the switch is
enabled or disabled.
VLAN Assignment
Mode
Indicates whether assignment of an authorized port to a
RADIUS assigned VLAN is allowed (enabled) or not (disabled).
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is
enabled or disabled.
2CSPC4.X8100-SWUM100.book Page 863 Wednesday, August 29, 2012 6:23 PM