Command Line Interface Guide

802.1x Commands 869
Logical Interface.............................. 96
Interface......................................
gi1/0/7
User Name...................................... brcm
Supp MAC Address...............................
00:08:A1:7E:45:1A
Session Time................................... 67
VLAN Id........................................ 1
VLAN Assigned..................................
Monitor Mode
Session Timeout................................ 0
Session Termination Action.....................
Default
show dot1x interface
This command shows the status of MAC Authentication Bypass. This feature
is an extension of Dot1x Option 81 feature added in Power Connect Release
2.1. to accept a VLAN name as an alternative to a number when RADIUS
indicates the Tunnel-Private-Group-ID for a supplicant.
Syntax
show dot1x interface {gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 869 Wednesday, August 29, 2012 6:23 PM