Command Line Interface Guide

Command Groups 87
Auto-VoIP
CDP Interoperability
show mac address-table
filtering
Displays the Multicast filtering configuration. PE
show mac address-table
interface
Displays the mac forwarding table entries for a
specific interface.
UE or
PE
show mac address-table
multicast
Displays Multicast MAC address table
information.
PE
show mac address-table
static
Displays statically created entries in the bridge-
forwarding database.
PE
show mac address-table vlan Displays all entries in the bridge-forwarding
database for the specified VLAN.
UE or
PE
show ports security Displays the port-lock status. PE
show ports security
addresses
Displays current dynamic addresses in locked
ports.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
switchport voice detect auto Enables the VoIP Profile on all the interfaces of
the switch.
GC or
IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
Command Description Mode
a
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC or
IC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 87 Wednesday, August 29, 2012 6:23 PM