Command Line Interface Guide

802.1x Commands 871
MAB mode (configured)..........................
Disabled
MAB mode (operational).........................
Disabled
Authenticator PAE State........................
Initialize
Backend Authentication State...................
Initialize
show dot1x interface statistics
Use the show dot1x interfacestatistics command in Privileged EXEC mode to
display 802.1x statistics for the specified interface.
Syntax
show dot1x interface {gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port} statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x statistics for the specified interface.
console#show dot1x interface gigabitethernet 1/0/2
statistics
Port......................................... gi1/0/2
2CSPC4.X8100-SWUM100.book Page 871 Wednesday, August 29, 2012 6:23 PM