Command Line Interface Guide

892 Data Center Bridging Commands
Syntax
lldp tlv-select dcbxp [ets-config|ets-recommend|pfc|application-
priority|congestion-notification ]
no lldp tlv-select dcbxp [ets-config|ets-recommend|pfc|application-
priority|congestion-notification ]
Parameter Description
Default Configuration
The default value is to transmit all TLVs as enabled by the auto-configuration
port role. In manual mode, the default is to transmit all TLVs.
Command Mode
Global Config, Interface Config
User Guidelines
Interface configuration overrides the global configuration on the designated
interface. The PC8024 proxies ETS TLVs received from the configuration
source to the other auto-configured ports while not acting upon them. The
PC81xx both processes and proxies ETS TLVs received from the
configuration source as well as generates ETS TLVs on manually configured
ports.
Example
The following example configures the port to transmit all TLVs.
console(interface-config-te1/0/1)#no lldp tlv-select dcbxp
Parameter Description
Ets-config Transmit the ETS configuration TLV.
Ets-recommend Transmit the ETS recommendation TLV.
Pfc Transmit the PFC configuration TLV.
Application-priority Transmit the application priority TLV.
Congestion-
notification
Transmit the congestion notification TLV.
2CSPC4.X8100-SWUM100.book Page 892 Wednesday, August 29, 2012 6:23 PM