Command Line Interface Guide

Data Center Bridging Commands 895
User Guidelines
This command has no user guidelines.
Examples
console# show lldp tlv-select interface te1/0/1
Interface ETS Config ETS Recommend PFC App Priority QCN
------------ ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
console# show lldp tlv-select interface all
Interface ETS Config ETS Recommend PFC App Priority QCN
----------- ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
te1/0/2 No No Yes No Yes
show lldp dcbx
Use the show lldp dcbx command in Privileged EXEC mode to display the
Traffic Class to Traffic Class Group mapping.
Syntax
Show lldp dcbx [interface <all|interface-id <detail|status>>]
Parameter Description
Default Configuration
This command has no default setting.
Parameter Description
interface-id A valid physical interface specifier.
all All interfaces.
detail Display detailed DCBX information.
status Display a status summary.
2CSPC4.X8100-SWUM100.book Page 895 Wednesday, August 29, 2012 6:23 PM