Command Line Interface Guide

Command Groups 91
E-mail Alerting
permit ip host mac host Configures a rule for a valid IP address and
MAC address combination used in ARP packet
validation.
ARPA
show arp access-list Displays the configured ARP ACLs with the
rules.
PE
show ip arp inspection Displays the Dynamic ARP Inspection
configuration.
PE
show ip arp inspection
interfaces
Displays the Dynamic ARP Inspection
configuration on all the DAI enabled interfaces.
PE
show ip arp inspection vlan Displays the Dynamic ARP Inspection
configuration on all the VLANs in the given
VLAN range.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
logging email Enables e-mail alerting and sets the lowest
severity level for which log messages are e-
mailed.
GC
logging email urgent Sets the lowest severity level at which log
messages are e-mailed in an urgent manner.
GC
logging traps Sets the lowest severity level at which SNMP
traps are logged.
GC
logging email message-type
to-addr
Configures the To address field of the e-mail. GC
logging email from-addr Configures the From address of the e-mail. GC
logging email message-type
subject
Configures the subject. GC
logging email logtime Configures the value of how frequently the
queued messages are sent.
GC
logging email test message-
type
Tests whether or not an e-mail is being sent to
an SMTP server.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 91 Wednesday, August 29, 2012 6:23 PM