Command Line Interface Guide

92 Command Groups
Ethernet Configuration
show logging email statistics Displays information on how many e-mails are
sent, how many e-mails failed, when the last e-
mail was sent, how long it has been since the
last e-mail was sent, how long it has been since
the e-mail changed to disabled mode.
PE
clear logging email statistics Clears the e-mail alerting statistics. GC
security Sets the e-mail alerting security protocol. MSC
mail-server ip-address |
hostname
Configures the SMTP server IP address and
changes the mode to Mail Server Configuration
Mode.
GC
port (Mail Server
Configuration Mode)
Configures the TCP port to use for
communication with the SMTP servers.
MSC
username (Mail Server
Configuration Mode)
Configures the username required by the
authentication.
MSC
password (Mail Server
Configuration Mode)
Configures the password required to
authenticate to the e-mail server.
MSC
show mail-server Displays the configuration of all the mail servers
or a particular mail server.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear counters Clears statistics on an interface. PE
description Adds a description to an interface. IC
duplex Configures the full/half duplex operation of a
given Ethernet interface when not using auto-
negotiation.
IC
flowcontrol Configures the flow control on a given interface. GC
interface Enters the interface configuration mode to
configure parameters for an interface.
GC or
IC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 92 Wednesday, August 29, 2012 6:23 PM