Command Line Interface Guide

FIP Snooping Commands 921
show fip-snooping enode
Use the show fip-snooping enode command in User EXEC or Privileged
EXEC mode to display information about the interfaces connected to
ENodes.
Syntax
show fip-snooping enode [enode-mac]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following information is displayed.
The following additional information is displayed when the optional
argument is supplied.
Parameter Description
enode-mac MAC address of the enode to display.
Parameter Description
Interface Interface to which the ENode is connected.
VLAN ID number of the VLAN to which the ENode belongs.
NameID Name of the ENode.
FIP-MAC MAC address of the ENode.
FCID Fiber channel ID number of the virtual port that was created by
FCF when the ENode logged into the network.
Sessions Established Number of successful virtual connections established.
2CSPC4.X8100-SWUM100.book Page 921 Wednesday, August 29, 2012 6:23 PM