Command Line Interface Guide

922 FIP Snooping Commands

This command can only be entered after FIP snooping is enabled using the

feature fip-snooping

command. Otherwise, it does not appear in the CLI

syntax tree.

Example #1

The following example displays sample output of the command with no

optional argument supplied.

(switch)# show fip-snooping enode

Interface VLAN Name-ID ENode-MAC FCFs

Sessions

-----------------------------------------------------

1/0/2 1 00000000 00:0c:29:65:82:bc 1

1/0/5 100 00000000 00:0d:31:23:53:11 2

Example #2

The sample output of the command below displays with the optional

argument supplied.

(switch)# show fip-snooping enode 00:0c:29:65:82:bc

Interface 1/0/2

VLAN 1

Parameter Description

Sessions Waiting Number of virtual connections waiting for FCF acceptance.

Sessions Failed Number of virtual sessions failed.

Max-FCoE-PDU Maximum FCoE PDU size the ENode MAC intends to use for

FCoE traffic. This is equivalent to the maximum Ethernet

frame payload the ENode intends to send.

Time elapsed Time elapsed since first successful login session snooped from

the ENode.

2CSPC4.X8100-SWUM100.book Page 922 Wednesday, August 29, 2012 6:23 PM