Command Line Interface Guide

FIP Snooping Commands 925
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping command. Otherwise, it does not appear in the CLI
syntax tree.
Example #1
The following displays sample output of the command when no optional
argument is provided.
(config)# show fip-snooping fcf
-----------------------------------------------------
--------------------------
Interface VLAN ENodes FPMA/ FC-MAP FCF-MAC
Name-ID Fabric-Name
SPMA
-----------------------------------------------------
--------------------------1/0/11 1 2 FPMA
0e:fc:00 00:0d:ec:b2:2c:80 20:65:00:0d: 20:65:00:0d:
ec:b1:9e:81 ec:97:52:c1
3/0/10 1 1 FPMA 0e:fc:00 00:0d:ec:b2:2c:81
00000000 00000000
3/0/15 100 1 FPMA 0e:fc:10 00:0c:ab:2c:eb:12
00000000 00000000
FKA-ADV FIP keepalive interval (FKA_ADV_PERIOD) in seconds
configured on the FCF multiplied by five. For example, if the
FKA_ADV period configured on the FCF is 80 seconds, the
value of this field is 400.
FCF Expiry Time This is timer value to monitor the status of the FCF. FCF entry
and all its associated virtual sessions will be removed when the
value reaches 0. This value is reset to Configured FKA-ADV
every time a Discovery Advertisement is received from the
FCF-MAC.
Time Elapsed Time since FCF is Discovered.
Parameter Description
2CSPC4.X8100-SWUM100.book Page 925 Wednesday, August 29, 2012 6:23 PM