Command Line Interface Guide

928 FIP Snooping Commands
The command output format is different when the detail option is used. The
information below is displayed.
Parameter Description
VLAN VLAN to which the session belongs.
FC-MAP FCMAP value used by the FCF.
FCFs Number of FCFs discovered.
ENodes Number of ENodes discovered.
Sessions Total virtual sessions in FCoE VLAN.
FCF Information
Interface Interface on which the FCF is discovered.
MAC MAC address of the FCF.
ENodes Total number of ENodes that are connected to the FCF.
Sessions Total number of virtual sessions accepted by FCF in the
associated VLAN.
ENode Information
Interface Interface to which the ENode is connected.
MAC MAC address of the ENode.
Sessions Total number of virtual sessions originated from ENodes to
FCF in the VLAN.
Waiting Total number of virtual connections waiting for FCF
acceptance in the VLAN.
Session Information
FCoE-MAC Source MAC address of the FCoE packets that are originated
by the ENode as part of the session.
Request (FP, SP) FIP session request type sent by ENode. This can be FLOGI or
FDESC (NPIV FDISC). Whereas FP and SP values are the FP
bit and the SP bit values in the FLOGI or NPIV FDISC request
respectively.
2CSPC4.X8100-SWUM100.book Page 928 Wednesday, August 29, 2012 6:23 PM