Command Line Interface Guide

Command Groups 93
interface range Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
GC,
IC, IR
show interfaces advertise Displays information about auto negotiation
advertisement.
PE
show interfaces
configuration
Displays the configuration for all configured
interfaces.
UE
show interfaces counters Displays traffic seen by the physical interface. UE
show interfaces description Displays the description for all configured
interfaces.
UE
show interfaces detail Displays the detail for all configured interfaces. UE
show interfaces status Displays the status for all configured interfaces. UE
show statistics Displays statistics for one port or for the entire
switch.
PE
show statistics switchport Displays detailed statistics for a specific port or
for the entire switch.
PE
show storm-control Displays the storm control configuration. PE
shutdown Disables interfaces. IC
speed Configures the speed of a given Ethernet
interface when not using auto-negotiation.
IC
storm-control broadcast Enables Broadcast storm control. IC
storm-control multicast Enables the switch to count Multicast packets
together with Broadcast packets.
IC
storm-control unicast Enables Unicast storm control. IC
switchport protected Sets the port to Protected mode. IC
switchport protected name Configures a name for a protected group. GC
show switchport protected Displays protected group/port information. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 93 Wednesday, August 29, 2012 6:23 PM