Command Line Interface Guide

FIP Snooping Commands 935
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table describes the packet counters per FIP Operation.
Packet Counter Description
VR Number of VLAN Request messages received on the VLAN.
VN Number of VLAN Notification messages received on the
VLAN.
MDS Number of Multicast Discovery Solicitation messages snooped
on the VLAN.
UDS Number of Unicast Discovery Solicitation messages snooped on
the VLAN.
FLOGI Number of Fabric Logins snooped on the VLAN.
FDISC Number of fabric discovery logins snooped on the VLAN.
LOGO Number of Fabric Logouts on the VLAN.
VNPort-keep-alive Number of VN_Port keepalive messages snooped on the VLAN.
MDA Number of Multicast Discovery Advertisement messages
snooped on the VLAN.
UDA Number of Unicast Discovery Advertisement messages snooped
on the VLAN.
FLOGI_ACC Number of Fabric Logins accepted on the VLAN.
FLOGI_RJT Number of Fabric Logins rejected on the VLAN.
FDISC_ACC Number of Fabric Discoveries accepted on the VLAN.
FDISC_RJT Number of Fabric Discoveries rejected on the VLAN.
LOGO_ACC Number of Fabric Logouts accepted on the VLAN.
LOGO_RJT Number of Fabric Logouts rejected on the VLAN.
2CSPC4.X8100-SWUM100.book Page 935 Wednesday, August 29, 2012 6:23 PM