Command Line Interface Guide

936 FIP Snooping Commands
The following table describes the other interface or session-related counters.
When an interface is provided as an argument, interface applicable statistics
are only displayed. See
Example #3 below for applicable statistics on
interface.
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping command. Otherwise, it does not appear in the CLI
syntax tree.
Example #1
Below is the sample command usage with no optional arguments supplied.
(switch)# show fip-snooping statistics
VLAN: 4
CVL Number of Clear Virtual Links actions on the VLAN.
Other Counters Description
Number of Virtual
Session Timeouts
Number of Virtual sessions removed due to session timer expiry.
Number of FCF
Session Timeouts
Number of ACTIVE sessions timed out due to Discovery
Advertisements expiry from FCFs in the VLAN.
Number of Session
configuration
failures
Number of sessions in the VLAN that failed to be configured in
the hardware.
Number of Sessions
denied with FCF
limit
Number of sessions that are denied to be created for the new
FCF as the number of FCFs reached the maximum allowed in
the VLAN.
Number of Sessions
denied with ENode
limit
Number of session create requests that are denied for the new
ENode as the number of ENodes reached the maximum
allowed in the system.
Number of Sessions
denied with System
limit
Number of sessions that are denied to be created as the number
of sessions reached the maximum allowed in the system.
Packet Counter Description
2CSPC4.X8100-SWUM100.book Page 936 Wednesday, August 29, 2012 6:23 PM