Command Line Interface Guide

FIP Snooping Commands 943
Inactive Ports:
clear fip-snooping statistics
Use the clear fip-snooping statistics command in User EXEC or Privileged
EXEC mode to clear the FIP Snooping statistics in the supplied VLAN or on
a supplied interface. If the optional (VLAN or interface) argument is not
given, this command clears the statistics on all FIP snooping-enabled VLANs.
Syntax
clear fip-snooping statistics [vlan vlan-id ] | [interface interface-id ]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC
User Guidelines
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping command. Otherwise, it does not appear in the CLI
syntax tree.
Parameter Description
vlan-id A VLAN on which FIP snooping is enabled.
interface-id An interface belonging to a VLAN on which FIP snooping is
enabled.
2CSPC4.X8100-SWUM100.book Page 943 Wednesday, August 29, 2012 6:23 PM