Command Line Interface Guide

950 Priority Flow Control Commands
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following examples show the priority flow control status and statistics.
s1#show interfaces tengigabitethernet 1/0/1 priority-
flow-control
Interface Detail: te1/0/1
PFC Configured State: Disabled
PFC Operational State: Enabled
Configured Drop Priorities: 2-7
Operational Drop Priorities: 2-7
Configured No-Drop Priorities: 0-1
Operational No-Drop Priorities: 0-1
Delay Allowance: 32456 bit times
Peer Configuration Compatible: True
Compatible Configuration Count: 3
Incompatible Configuration Count: 1
Priority Received PFC Frames Transmitted PFC Frames
-------- ----------------- ----------------------
Parameter Description
interface-id A valid Ethernet port identifier.
2CSPC4.X8100-SWUM100.book Page 950 Wednesday, August 29, 2012 6:23 PM