Command Line Interface Guide

966 ARP Commands
Command Mode
User EXEC and Privileged EXEC modes, Config mode and all Config sub-
modes
User Guidelines
The show arp command will display static (user-configured) ARP entries
regardless of whether they are reachable over an interface or not.
Example
The following example shows show arp command output.
console#show arp
Static ARP entries are only active
when the IP address is reachable on a local subnet
Age Time (seconds)............................. 1200
Response Time (seconds)........................ 1
Retries........................................ 4
Cache Size..................................... 6144
Dynamic Renew Mode............................
Disable
Total Entry Count Current / Peak.............. 0 / 0
Static Entry Count Configured / Active / Max .. 1 / 0
/ 128
IP Address MAC Address InterfaceType Age
------------------------ --------------- -------
1.1.1.30000.0000.0022n/a Static n/a
2CSPC4.X8100-SWUM100.book Page 966 Wednesday, August 29, 2012 6:23 PM