Command Line Interface Guide

980 DHCP Server and Relay Agent Commands
Syntax
ip dhcp bootp automatic
no ip dhcp bootp automatic
Parameter Description
This command does not require a parameter description.
Default Configuration
Automatic BOOTP client address assignment is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#ip dhcp bootp automatic
ip dhcp conflict logging
Use the ip dhcp conflict logging command in Global Configuration mode to
enable DHCP address conflict detection. Use the no form of the command to
disable DHCP conflict logging.
Syntax
ip dhcp conflict logging
no ip dhcp conflict logging
Parameter Description
This command does not require a parameter description.
Default Configuration
Conflict logging is enabled by default.
2CSPC4.X8100-SWUM100.book Page 980 Wednesday, August 29, 2012 6:23 PM