Command Line Interface Guide

DHCP Server and Relay Agent Commands 981
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#ip dhcp conflict logging
ip dhcp excluded-address
Use the ip dhcp excluded-address command in Global Configuration mode
to exclude one or more DHCP addresses from automatic assignment. Use the
no form of the command to allow automatic address assignment for the
specified address or address range.
Syntax
ip dhcp excluded-address low-address { high-address }
no ip dhcp excluded-address
low-address { high-address }
Parameter Description
Default Configuration
By default, no IP addresses are excluded from the lists configured by the IP
DHCP pool configuration.
Command Mode
Global Configuration mode
Parameter Description
Low-address An IPv4 address indicating the starting range for exclusion from
automatic DHCP address assignment.
High-address An IPv4 address indicating the ending range for exclusion from
automatic DHCP address assignment. The high-address must
be numerically greater than the low-address.
2CSPC4.X8100-SWUM100.book Page 981 Wednesday, August 29, 2012 6:23 PM