Command Line Interface Guide

DHCP Server and Relay Agent Commands 995
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show ip dhcp server statistics
show ip dhcp pool
Use the show ip dhcp pool command in User EXEC or Privileged EXEC
mode to display the configured DHCP pool or pools. If no pool name is
specified, information about all pools is displayed.
Syntax
show ip dhcp pool [all | poolname ]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
Parameter Description
poolname Name of the pool. (Range: 1-32 characters)
2CSPC4.X8100-SWUM100.book Page 995 Wednesday, August 29, 2012 6:23 PM