Administrator Guide

Converged Enhanced Ethernet Administrator’s Guide 55
53-1002507-01
Configuring the MAC address table
6
DRAFT: BROCADE CONFIDENTIAL
To specify an aging time or disable the aging time for MAC addresses, perform the following steps
from privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the appropriate command based on whether you want to specify an aging time or disable
the aging time for MAC addresses:
switch(config)#mac-address-table aging-time 600
Adding static addresses to the MAC address table
To add a static address to the MAC address table, perform the following steps from privileged EXEC
mode.
1. Enter the configure terminal command to access global configuration mode.
2. Add the static address 0011.2222.3333 to the MAC address table with a packet received on
VLAN 100:
switch(config)#mac-address-table static 0011.2222.3333 forward
tengigabitethernet 0/1 vlan 100