Reference Guide

72 Fabric OS FCIP Administrator’s Guide
53-1002474-01
Managing the VLAN tag table
3
switch:admin> portcfg fciptunnel 8/ge0 delete 6
switch:admin> portcfg fciptunnel 8/ge0 delete 7
For full details on syntax and using this command, refer to the Fabric OS Command Reference
Manual.
Deleting an IP route on a Brocade 7500 FR4-18i
The following command deletes an IP route for a specified IPv4 address.
portcfg iproute [slot/]ge0|ge1 delete dest_IPv4_addr netmask
For an IPv6 address:
portcfg iproute [slot/]ge0|ge1 delete IPv6_addr/prefix_len
For full details on syntax and using this command, refer to the Fabric OS Command Reference
Manual.
Deleting an IP interface on a Brocade 7500 FR4-18i
The following command deletes an IP interface (IPIF).
portcfg ipif [slot/]ge0|ge1 delete ipaddr
NOTE
You cannot delete an IP interface until after the tunnel and route have been removed,
For full details on syntax and using this command, refer to the Fabric OS Command Reference
Manual.
Managing the VLAN tag table
To manage the VLAN tag table on a Brocade 7500 FR4-18i, refer to “Managing the VLAN tag
table”
on page 26.