Reference Guide

Fabric OS FCIP Administrator’s Guide 85
53-1002474-01
Portshow command usage
4
For details of command syntax and output examples, refer to the Fabric OS Command Reference
Manual.
Portshow command usage
Use the portshow command to display operational information for Brocade 7800 switches,
Brocade FX8-24 blades, and Brocade FR4-18i blades. The Fabric OS Command Reference Manual
provides complete descriptions of portshow command syntax and options. The following sections
identify a few specific outputs that may be useful for maintenance and troubleshooting.
Displaying IP interfaces
The following example displays IP interface information for a 7800 switch.
switch:admin> portshow ipif ge0
For details of command syntax and output examples, refer to the Fabric OS Command Reference
Manual.
Displaying IP routes
The following example displays IP route information for a 7800 switch.
switch:admin> portshow iproute ge5
For details of command syntax and output examples, refer to the Fabric OS Command Reference
Manual.
Displaying FCIP tunnel information
The following example of the portshow fciptunnel command is used most often to determine FCIP
tunnel status.
switch:admin> portshow fciptunnel all -c
For details of command syntax and output examples, refer to the Fabric OS Command Reference
Manual.
Displaying IP addresses
You can display IP addresses configured for specific circuits using the ip-address option with the
circuit option as in the following example.
switch:admin> portshow fciptunnel all --circuit --ip-address
For details of command syntax and output examples, refer to the Fabric OS Command Reference
Manual.