Installation Manual

BigIron RX Installation Guide 89
53-1001811-01
Chapter
3
Using the Brocade Structured Cabling Components
In this chapter
•Cable Cinch overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
•mRJ-21 procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
•RJ-45 procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Cable Cinch overview
Use the following guidelines when using the Brocade Cable Cinch Clips with mRJ-21 or RJ-45
cables. The following sections will provide detailed instructions:
• “mRJ-21 procedures” on page 90
• “RJ-45 procedures” on page 94
Position the cable cinch with the open end to the left (no slot) as shown in Figure 56.
FIGURE 56 Cable CInch overview
1 Slot 1 5 Open end
2Slot 2 6Rear
3Slot 3 7Front
4Slot 4
123
45
6
7