Installation Manual

BigIron RX Installation Guide 161
53-1001811-01
Replacing cooling system components
6
There is a hook on the back of the retainer that is attached to the grab-strap. As you pull the
retainer out, the filter is pulled along with it.
FIGURE 84 Air filter removal and replacement for BigIron RX-16
3. Attach the hook on the back of the filter retainer to the filter grab-strap.
4. Push the filter retainer into the chassis and tighten the two screws.
Replacing the air filter in the BigIron RX-4 or BigIron RX-8
Follow the steps given below to replace the air filter in the BigIron RX-4 or BigIron RX-8.
1. Loosen the two screws in the front of the filter retainer.
2. Pull the filter retainer away from the chassis as shown in Figure 85 or Figure 86.
1 Fan tray 4 Filter grap strap
2 Filter 5 Direction of airflow in chassis
3 Filter retainer
1
2
3
4
5