Installation Manual

170 BigIron RX Installation Guide
53-1001811-01
Displaying flash memory and version information
7
Boot-Monitor Image Indicates the monitor image installed in the management module’s code
flash. The image name format is described in “Software image naming
conventions” on page 165. The output displays the following information
about the image:
• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
is used by Brocade for record keeping. The “xx” indicates the hardware
type, while the “y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled
the image.
Startup Configuration The output displays the following information about the startup
configuration, which is saved in the management module’s code flash:
• Size – Size, in bytes, of the startup configuration.
• Check sum – A unique ID for the file. If the contents of the file change,
the check sum changes also.
• Modification date and time – Date and time that the startup
configuration was last saved.
Boot Flash The model number and size of the management module’s boot flash.
Boot-Monitor Image Indicates the boot image installed in the management module’s boot flash.
The image name format is described in “Software image naming
conventions” on page 165. The output displays the following information
about the image:
• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
is used by Brocade for record keeping. The “xx” indicates the hardware
type, while the “y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled
the image.
Interface Modules
Line Card Slot <number> The interface module for which flash information is displayed.
The <number> parameter indicates the number of the chassis slot, 1 – 16,
in which the interface module is installed.
Code Flash The model number and size of the interface module’s code flash.
IronWare Image (Primary or
Secondary)
Indicates the IronWare image installed in the primary or secondary location
in the interface module’s code flash. The image name format is described
in “Software image naming conventions” on page 165. The output displays
the following information about the image:
• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
is used by Brocade for record keeping. The “xx” indicates the hardware
type, while the “y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled
the image.
TABLE 25 Code flash and boot flash information (Continued)
This field... Displays...