Installation Manual

68 BigIron RX Installation Guide
53-1001811-01
Installing a BigIron RX-32 switch
2
Details of cable routing are as follows:
CAUTION
Be sure not to exceed the minimum recommended bend radius for the cables: 2 in. for MRJ-21
cables, and 1.5 in. for Category 5 (RJ-45) and fiber-optic cables.
Cable routing for the upper-left quadrant
Route slot cards in the numerical order starting with the cables of Slot Card #1.
1. Route slot cards #1 and #2 cables directly to the left through the side comb. Refer to
Figure 46.
FIGURE 46 Routing upper-left quadrant cables to the left
1 Upper left quadrant 3 Cables from slot #1
2 Side combs (18) 4 Cables from slot #2
2
4
1
3