Installation Manual

BigIron RX Installation Guide 87
53-1001811-01
Verifying proper operation
2
• CARD_STATE_FAILED – The management module was unable to bring up an interface module
properly. If you observe this status, make certain that the interface module is installed
properly. For more information, refer to “Installing BigIron RX-4 modules” on page 33,
“Installing BigIron RX-8 modules” on page 42, “Installing BigIron RX-16 modules” on page 52,
or “Installing BigIron RX-32 modules” on page 62.
• CARD_DOWN_REASON_<explanation> – The module is in a nonfunctional state. This status
appears with an explanation for why the module is down, for example,
"CARD_DOWN_REASON_BOOT_FAILED.” If the explanation does not help you resolve the
problem, you can contact Brocade technical support and provide the explanation included with
this status.